![]() Last, plug the printer back into your network with a normal CAT5 cable. YOu could THEN give the printer an IP that is valid on your network. Then in the web page, you could see if you could configure the IP settings of the printer. You could try using IE and see if the LaserJet card on the printer has a built-in web server (HP printers do usually), so you could then go to and hopefully a web page from the printer comes up. YOu would then be able to connect from the laptop to the IP of the printer. Then configure the laptop to have an IP address of 10.1.1.3 with the 255.255.255.0 subnet. THe configuration will tell you what the assigned IP address is.Īfter that, you can take a Crossover cable, plug one end into the printer and another end into a laptop, and configure the laptop to be on the same Class C network as the printer configuration says the printer is on.įor example, if the configuration page says the printer has an IP address of 10.1.1.4 and a subnet mask of 255.255.255.0 then you would plug the crossover into the printer and the other end into a laptop. Well, I would hit the Menu button and look around for a Print Configuration option.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |